Print Page - Recommendation for a good EEPROM/EPROM/Flash programmer?

Title: Recommendation for a good EEPROM/EPROM/Flash programmer?
Post by: infiniteNOP on May 19, 2014, 05:26:51 am

Hello everyone,

I am building an 6502-based system, but I need a good, cheap EEPROM programmer in order to program the Atmel 28C64 parallel EEPROM I am going to use. Could anyone recommend me a programmer that is under (or equals) the $50 mark or post a schematic of a homemade one?

The schematic of the EEPROM I want to use can be obtained at http://www.mouser.com/ds/2/36/doc0270-16204.pdf .

Thank you in advance,
Linuxlalala

Title: Re: Recommendation for a good EEPROM/EPROM/Flash programmer?
Post by: nurd on May 19, 2014, 10:06:14 am

i see the willem programmers recommended a lot

I think they're more known for their low price than for their quality, though

Famicom World

Family Computer => Technical & Repair Assistance => Topic started by: infiniteNOP on May 19, 2014, 05:26:51 am