Any pics of a modded Cart so the EverDrive-N8 can fit in there
I need to know I took apart a Baseball Cart
I can get you pics when I get back home later today.
Where was everyone when I needed help a few days agoo, I did it already, I wanted to know how to get the Hole for the MicroSD card
I opened both Carts with ease with Flat Heads, Didn't break it, thank god..Shaved for the MicroSD closed it, Couldn't get a SD card out, 2nd time I broke the piece to grab on the latch on the Famicom Cart.., Had to put the EverDrive in the Yellow Cart I made for SMB2J Cart
In all I needed L__E__T to guied me, Guess not
That's not exactly fair - I made a cart especially, then had also prepared some pictures of how I cut the shells, that was more than a year ago now I think.
Having said that, it's worthwhile having a go yourself, just wear decent protective eyewear and be very careful with any craft knives - they can easily slip and cut you or bits fly off into your eye(s).
I may actually have another cart prepared for this - I'll take a look later. If I do, you can have it, but it'll be a random colour.
Oh I'm always careful -- I don't care of color, But Black looks cool for me, But What ever color it's fine, But not Pink :P
I'm so sorry calling you out man, Thanks for helping me, But I was being a dick about it, Delaying..
I just used an adventure island cart with pcbs the ones with globs have a different configuration.
To make the sd hole i used a simple small file about 1 and 1/2 cm wide after i messured where it needed to be.
Was a pretty simple job like 5mins and works perfectly well.
(http://imagizer.imageshack.us/v2/150x100q90/248/dsc0047fn.jpg) (http://imageshack.com/f/6wdsc0047fnj)