Famicom World

Family Computer => Technical & Repair Assistance => Topic started by: FAMICOM_87 on September 21, 2016, 06:08:49 am

Title: NES10 Lockout Chip Mod (no cutting pin4)
Post by: FAMICOM_87 on September 21, 2016, 06:08:49 am
look what I  found ! any one want to try ?  :o
https://aaltomies.wordpress.com/2014/12/26/pal-nes-region-free-mod-without-tampering-with-cic-chip-leg/
Title: Re: NES10 Lockout Chip Mod (no cutting pin4)
Post by: kiwidaveinjapan on September 22, 2016, 11:57:16 pm
Ah yes, I remember doing this mod to PAL NES back when I lived in New Zealand.  ;D
Then I went to do one for a friend.....who had a different revision of the board, and i couldn't do it, as the contact points were different.  :'(
So, it can be done, just check your board revision before trying :)
Title: Re: NES10 Lockout Chip Mod (no cutting pin4)
Post by: FAMICOM_87 on September 23, 2016, 07:56:14 am
so if it works on PAL NESes is this apply to all PAL regions or... ?  :)