I'm considering purchasing a Dendy Famiclone and I'm not sure what I should do to make sure I don't like blow a fuse or set my house on fire. My question is, can a Famicom power adapter work on a Dendy Famiclone. Any help is appreciated. Thank you!
- OnettGal15 ???
Yes :) the original Famicom or Sega Mega Drive/Genesis1 adapters are OK for the job
All DC adapters with negative middle pin works 8)
You can use :
9V, 10V, 11V or 12V and at least 500mA or more current, better 1A ;)
Thank you! This is the Famiclone I was looking to buy. Its a Russian Famiclone and I was worried about the different outlets and voltage and if I need a step down converter to use it in America and all of that stuff. Thank you again!
Quote from: FAMICOM_87 on April 14, 2018, 03:50:16 pm
Yes :) the original Famicom or Sega Mega Drive/Genesis1 adapters are OK for the job
All DC adapters with negative middle pin works 8)
You can use :
9V, 10V, 11V or 12V and at least 500mA or more current, better 1A ;)
Exactly. People tend to think about brands rather than what it is = Power converter. As long as pin compatible and within the voltage regulations any adapter for anything is okay. I mistook an adapter earlier from a humidifier machine my wife using and it worked (luckly) hahaha. ;D
Quote from: OnettGal15 on April 15, 2018, 02:18:08 am
Thank you! This is the Famiclone I was looking to buy. Its a Russian Famiclone and I was worried about the different outlets and voltage and if I need a step down converter to use it in America and all of that stuff. Thank you again!
Actually this is one of Micro Genius clone models made in Taiwan , rebranded as Dendy for ex USSR country's
Like Pegasus clones in Poland are again rebranded Micro Genius models.
https://en.wikipedia.org/wiki/Micro_Genius
Remeber ALL new and old clones uses the same power supplies (negative pin and voltage about 9-12V) ! only difference is that old ones want more current above 500mA recommended 1A, and new ones can run on 500mA without problem :)
No step up or down converters! just use any DC regulated power supply for your outlet (110V or 220V input) with those output specifications I mentioned above 8)
Ohh thanks for the info! :diskkun: :redcart:
Quote from: OnettGal15 on April 15, 2018, 06:10:58 am
Ohh thanks for the info! :diskkun: :redcart:
You are welcome :D