Hello All!
Want to sell a modded system that I made in my spare time. The mods are listed as below:
1. NES-Famicom Dual Cart System
2. Region Free Mod
3. NES RGB Mod
4. Rear I/O Mod - gives option to choose sync (Original PPU Composite, Clean sync, Composite Video Sync), uses newer components to get 5V 2A for the system. Multi AV output by the PlayStation connector. Also had PIC MCU to control the pallete cycle and Reset (Soft/Hard)
5. Red/Blue Led Mod - Pallete cycle causes LED to go from Red--> Blue--> Purple
6. Famicom Expansion Audio mod for the Famicom Cartridges
7. Cartridge slot has a 3D printed door to protect from Dust
8. New Rear I/O labels
9. Transparent Famicom Cartridges glow in the Dark with a micro switch inside to control the lights.
Video of the Mod :
https://youtu.be/1AAh2Hnxqik
Pictures:
(https://i.postimg.cc/FKRycv5s/DSC-1384-Copy.jpg)
(https://i.postimg.cc/vHTXf5rd/IMG-20190622-131954.jpg)
(https://i.postimg.cc/J4S3Xv7b/IMG-20190622-132102.jpg)
(https://i.postimg.cc/4d8VxFFH/IMG-20190622-132106.jpg)
(https://i.postimg.cc/sgSY4m1b/IMG-20190622-132109.jpg)
(https://i.postimg.cc/pdHDGjFr/IMG-20190622-132117.jpg)
(https://i.postimg.cc/76PSDyXy/IMG-20190622-132123.jpg)
(https://i.postimg.cc/Sx08R9Vd/IMG-20190622-132127.jpg)
(https://i.postimg.cc/j2LNwQGg/IMG-20190622-132133.jpg)
(https://i.postimg.cc/ZKvpJHP0/IMG-20190622-132140.jpg)
(https://i.postimg.cc/xdnzySwb/IMG-20190622-132150.jpg)
(https://i.postimg.cc/cHJt2B4x/IMG-20190622-132157.jpg)
Asking: 250USD+ Shipping from Japan. SOLD
The body is in good shape so I think the price is right. The Famicom Slot has been tested with many games and it works fine. The NES slot has been cleaned and sometimes carts dont need to be pushed down, they simply work after being inserted. Please let me know in case you need any more information from my end. I have a few spare PCBs for the dual cart mod which I can sell if you wish to mod your system. Also, I take this opportunity to ask you to subscribe to my YouTube Channel!
-Rama
Beautiful mod! Is it Disk System-compatible? ???
Watched this video this morning when I woke up - nice project and came out really well! If it doesn't sell here I would have thought someone on Nintendo Age would pick this up pretty quickly...
Quote from: Jedi QuestMaster on June 21, 2019, 09:54:01 pm
Beautiful mod! Is it Disk System-compatible? ???
Heyy, I totally forgot about the Disk System.. the cart slot hole is a little deeper than the disk system cart can go and hence it does not contact :( damn...
Post Merge: June 22, 2019, 05:07:42 pm
Quote from: L___E___T on June 22, 2019, 02:17:10 am
Watched this video this morning when I woke up - nice project and came out really well! If it doesn't sell here I would have thought someone on Nintendo Age would pick this up pretty quickly...
Thank you Luke!
Would a cart slot extender work? You know those items that sit on top to supposedly reduce wear?
Yes! They should work! I never knew of such things... But it is feasible!
I mean it might work to reduce the gap so you can plug the RAM adaptor into it. Maybe.
Quote from: L___E___T on June 23, 2019, 10:22:39 am
I mean it might work to reduce the gap so you can plug the RAM adaptor into it. Maybe.
Yes it is possible!
This is a really nice modded NES, possibly the best looking NES mod I've seen. I like the Famicom slot on top.
If the slot was grey, could support the RAM adapter, and also had a 21 pin expansion port, this would be absolute perfection.
Tons of people would buy these, especially now that the HDMI Analogue NT is discontinued. Keep up the good work dude.
Thank you! :)
How did u cut hole in plastic with such precision? This is amazing.
Heyy Krzy! I took serious accurate measurements and then had to do months of smoothing and hand filling to achieve the near perfect hole.. I thought i have built muscles after this project.. :-[
Not being able to fit a RAM adapter is no big deal; who in their right mind would stack an NES atop a Disk System? :crazy:
Quote from: Jedi QuestMaster on June 25, 2019, 08:41:29 pm
Not being able to fit a RAM adapter is no big deal; who in their right mind would stack an NES atop a Disk System? :crazy:
They could still be side-by-side buddies :) Or... someone could make a custom NES Disk System to fit underneath the NES. That would be insane in the rubber membrane
Haha yes!
Yeah this is a super nice item. I was gonna mod my CopyNES with a fami slot, but then "blinking light win" came out and i've been getting better performance out of my adapters
Any reason why the cart slot cover is orange? I think black or grey would look better
Quote from: famiac on June 27, 2019, 09:11:02 am
Yeah this is a super nice item. I was gonna mod my CopyNES with a fami slot, but then "blinking light win" came out and i've been getting better performance out of my adapters
Any reason why the cart slot cover is orange? I think black or grey would look better
Hey Thanks Famiac!
I wanted to go for grey and was thinking to paint it .. bt Orange looked nice and i left it that way! Hahaha
Price dropped!
Bump