Text only | Text with Images

Famicom World

Family Computer => Famicom / Disk System => Topic started by: djense1 on October 18, 2010, 08:30:38 am

Title: Famicom Box connection to PAL TV
Post by: djense1 on October 18, 2010, 08:30:38 am
Anyone can tell me how to connect the famicom box (japan Ntsc) to multinorm PAL TV? Which cable i need?
Title: Re: Famicom Box connection to PAL TV
Post by: 133MHz on October 18, 2010, 08:44:00 am
You need a simple monaural RCA cable.
(http://famicomworld.com/wp-content/uploads/2009/03/famicombox11.jpg) (http://www.inmax.ca/images/rca-cable.gif)
Also don't forget the voltage converter.
(http://www.mondoplast.ro/ft/st-100.jpg)
Title: Re: Famicom Box connection to PAL TV
Post by: djense1 on October 18, 2010, 11:10:01 pm
Ok I see. I understand that you can conncet this monoaural RCA cable to famicom box but i am not sure how can you connect the RCA to TV (maybe stupid question, but i do not know honestly ;-)). Step down i have already and it work nicely. Do you own also a famicom box? Which games you own?
Title: Re: Famicom Box connection to PAL TV
Post by: Ragnar on May 03, 2011, 05:03:48 pm
Hi, just wondering what the watts were for the step down converter, for the famicombox.
Title: Re: Famicom Box connection to PAL TV
Post by: djense1 on May 05, 2011, 10:21:22 am
200 Watt
Title: Re: Famicom Box connection to PAL TV
Post by: Ragnar on May 05, 2011, 10:45:04 am
i just checked it, it is ok to use a 45watt if you are just using the plug for the system itself, but if you are going to use the other plugs i would guess you would need more  :)
Text only | Text with Images