What type of paper should be used when making a reproduction famicom game label?
Give specifics please and tell where the paper can be purchased.
thanks!
I use simple (cheap) adhesive paper (adhesive blank labels 210x297mm - Agipa) and then slap thick transparent adhesive foil (a bit expensive - Self adhesive laminating sheets - Fellowes) over it. So I can print on any printer. The foil changes the colour tone a bit, works splendidly!
extra glossy sticker paper. I think its sometimes advertised as "photo stickers" paper. It looks the closest to the real deal I think.
Some people just use regular paper, glue it down, then cut out a piece of clear packing tape and lay it over top. I think this way is terrible as it can cause bubbles, yellowing, etc....
basically, you pretty much will have to find your own technique that best suits your tastes.
I like to use photo paper & thick packing tape. It takes practice to get it right without having bubbling, but I have down to a science! ;D
I find gluing it down with a photo glue stick is easier in that you can adjust it before it dries.
(http://i498.photobucket.com/albums/rr343/JediQuestMaster/ztg4.png)
(http://i498.photobucket.com/albums/rr343/JediQuestMaster/ztf2.png)
Journey tok Silius & SMB256 are mine:
(http://i498.photobucket.com/albums/rr343/JediQuestMaster/MiscGames3.jpg)
(http://i498.photobucket.com/albums/rr343/JediQuestMaster/MiscGames.jpg)
Those are some nice carts!
Great. thanks everyone! I tried using photo paper and double sided tape... it didnt feel smooth to the touch. It felt like photo paper...
Whatever paper you use is going to feel like paper; the laminate (or packing tape, or whatever seal you use) is what makes it feel smooth.