Hey Guys
I have a 7201 FDS chip that I pulled out of a disk drive system. The white gear had snapped in half so the system wasn't usable. I wanted to know if this is something you could replace with a later model FDS to get around the copy protection. If anyone wants to try it out and get back to me you can have it for $10 including airmail shipping. If anyone knows a reason as to why just swapping this part wouldn't work, let me know as well.
[Removed]
[Removed]
This should work fine, but I do have a 3206 I can swap the board on and try writing disks. I know the power boards differed between FDS models, so it's likely that the motor speed would require adjusting after the swap. This can either be done manually or using a game doctor + copymaster in order to tune the speed properly.
**SOLD**
Don't forget to mod the power board on the drive that get's the new 7201 drive controller board.
Japan-Games you should sell the power board on the 7201 that's worth something too.
-CFB
Yea--in my experience, most 7201 drive's power boards need to be modded as well. If you have a 3206 you definitely need to mod it, if you have a 7201 you may or may not have to mod it.