all my famicom does is make grey fuzz, can someone help me with this? (my tv is compatible with the japanese format
and i am using a megadrive 1 power adapter)
Have you made sure the game or games you are using to test the system are absolutely clean? My Famicom does this from time to time when my games get dirty. Take a cotton swab and some alcohol and clean the pins of the game if you have not already done so.
if this happens with me i will blow on the cartridge
it also does the same thing when i do not insert a cart,also when i opened it up,it was full of dust and hair, i cleaned it up as best i could,
but still did the exact same thing.
How do you have the Famicom connected to the TV? RF Adapter? A/V cables? Through a VCR? What channel do you have TV tuned to?
i use the rf connected to an old sony trinitron CRT (pal) and a sega sg-3000 power adapter (uk version)
I haven't heard of a PAL TV that will work with a Famicom via the RF adapter (but I guess they might exist?). For NTSC TVs, you need to tune into channel 95 or 96 to get it to work. What channels have you tried?
I've seen them. They exists but they are rare. Try all channels and see if you can get something that resembles a picture at all.
my tv does not go up to 95 :( and i do not have an ntsc tv
Post Merge: May 06, 2013, 05:18:51 am
oh,and the channels that i at least hear the change when it is turned on are 1 and 11
can you give me the model of your sony trinitron ? (i am 100% sure that it does support ntsc because most of them do but just to be sure)
KV-14T1U
So enter the service menu press these buttons in the following order :
(on screen display) -> 5 -> volume up -> tv
and then tt will show on your corner
and with 19 you can enable disable NTSC :)
im confused i dont know what those buttons are on the remote