Print Page - Help with this ripped PCB trace in my famiclone

Title: Help with this ripped PCB trace in my famiclone
Post by: Ouso1999 on March 17, 2023, 03:20:22 am

Hi everyone
When I was using this old time famiclone I found it not working anymore then I disassembled it to see that there was a wire which needed to be resoldered and I tried connecting it and it worked gain but when I tried to solder it I tore the PCB trace by accident . Is there a way to get it fixed back ? Can I do something to make it work again ?
(https://i.ibb.co/zrShHB1/20230317-003105.jpg) (https://ibb.co/7XGJNZH)
(https://i.ibb.co/TgH9kVD/20230317-003128.jpg) (https://ibb.co/71GsXwx)
(https://i.ibb.co/m5dTtWS/20230317-003211.jpg) (https://ibb.co/60GwbCN)

Title: Re: Help with this ripped PCB trace in my famiclone
Post by: Skawo on March 17, 2023, 05:17:04 am

It kinda looks like a little bit of the pad is still left. Try to solder to that bit. If not, scrape some of the solder mask from the trace leading to that pad and solder to the copper you expose.

Title: Re: Help with this ripped PCB trace in my famiclone
Post by: FAMICOM_87 on March 18, 2023, 01:23:14 pm

just follow the trace and solder on the transistor leg .

Famicom World

Family Computer => Technical & Repair Assistance => Topic started by: Ouso1999 on March 17, 2023, 03:20:22 am