solved: FDS Belt replaced now only errors?

Started by Chevy49_be, November 09, 2013, 08:07:06 am

Previous topic - Next topic

Chevy49_be

November 09, 2013, 08:07:06 am Last Edit: November 10, 2013, 05:29:49 am by Chevy49_be
Hello, I've bought two broken fds. Both had a broken belt so I did the replacement as described on:
http://www.famicomdisksystem.com/tutorials/fds-repair-mod/belt-replacement-adjustment/
First i took a rubber band as a replacement. It started after the first try  ;D. But after a day I got error 27.
Now I bought some belts via eBay:
http://www.benl.ebay.be/itm/271288756140?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
But I cant get them to work again?

Does anybody know if these belts are any good?
Is there an other problem?

Regards, Chevy49_be

Post Merge: November 10, 2013, 05:28:01 am

Sorry to answer my own question, but maybe I can help someone else with with this.

I started over with the tutorial as linked above, and found out i missed one thing:
QuoteIt's important to maintain the correct vertical alignment of the spindle hub, too, so make a note of it before first loosening the set screw. This is the factory positioning of the spindle hub. - See more at: http://www.famicomdisksystem.com/tutorials/fds-repair-mod/belt-replacement-adjustment/#sthash.UaApj1ad.dpuf


As I didn't make note of this it took some time to get it right but after a wile and allot of testing i finally managed tot get it working!

So the good news is: these cheap belts do work (maybe not for ever, but the original didn't last that long either ;) )