extra cord coming from the controller port in the back of the fami?

[bedgley]

Why would there be an additional cord coming out of the controller 1 port in the back of my famicom. I assume it's another av out. I try to use both the av cord and the rf output port and i can get neither to come out clear on my american tv, even on channel 95.

I still have to open it up to check it out, but was hoping someone could shed some light.

You guys are all very helpful, thanks in advance.

[satoshi_matrix]

take a picture. I'm not sure what you're talking about.

[bedgley]

hopefully that helps.....thanks!

[kite200]

this is an AV out mod probably. either its a botched mod or you're looking at the wrong channel. personally I would use a desolder to remove the mod

[133MHz]

Does it end in two or three male RCA plugs? If not, what kind of plug does the cable end to?

[bedgley]

it is an av mod.
plugged it into an rca video input and it came up beautifully on the screen.

stupid question: How do i get sound now?

Also, while i have the great help. My FDS is on perpetual now loading screen, so that either means broken belt or other issue? Its making noise when i put the disk in, its hard to describe

[133MHz]

If only one RCA plug comes with the wire and it's video, then the RF output is now the audio output. Try plugging a male to male RCA cable from the RF output to the audio input of your TV.

[bedgley]

If only one RCA plug comes with the wire and it's video, then the RF output is now the audio output. Try plugging a male to male RCA cable from the RF output to the audio input of your TV.

you are so right, that was it.

thanks so much for your help

[133MHz]

I'm glad to be of help .