Replace Subor SB-225 power supply?

[YamiMario]

I haven't posted here in almost a full decade, jesus christ
Hey everyone! A few years back I got a hold of a Subor SB-225, which to my understanding is fairly rare.




I'd like to get some life into it again, but the power supply seems pretty unsafe to me. It rattles when shaken, part of the cable is open, and in general just the age of the supply makes me weary to use it.




Does anybody know of a power supply that would be a good replacement for the system? Also, I live in Denmark, so a EU power plug is prefered, however I do have a power converter should the need be for one.

Also, out of curiosity, how much is this console worth? I saw one on eBay CiB 425 dollars.

Any help is appriciated!

[FAMICOM_87]

use any DC power supply with negative center pin - --o)-- +
Anything from 9V do 12V and rated at least 500mA (0.5A) or higher will do the job 

[YamiMario]

Any specific models that you'd recommend? Just to be sure I don't buy something that'll fry the machine.

[FAMICOM_87]

there is no specific model just look on the label for the right polarity voltage and current outputs I listed above ,and you are good to go   you can use for example adapter from Sega mega drive 1  (not from MD 2 only from 1!)

[YamiMario]

Had a Megadrive 1 power supply lying around, and it works perfectly, thanks for the help! 

[FAMICOM_87]

Had a Megadrive 1 power supply lying around, and it works perfectly, thanks for the help! 

No problem