Famicom controller to NES

Started by limwer, January 15, 2015, 09:23:33 am

Previous topic - Next topic

limwer

Hello,

I've got these adapters and I'm not sure whether to connect  Famicom accessories to NES, someone please enlighten me if I'm right.

It confuses me a bit that the two checks are to a single connector.  Also I have no attachment to test Famicom



Thanks..  ;D

maxellnormalbias

It's for NES accessories on the Famicom, because the Famicom's 15-pin input can handle 2 controllers.

limwer

Use a generic Famicom control to test and I did not work in classic NES and Top Loader..

The control works perfect directly on the Famicom

Maybe the wires are broken.  :'(

P

I would check all pins with a multimeter. If it's a Famicom controller to NES adapter.

Quote from: maxellnormalbias on January 15, 2015, 11:56:37 am
It's for NES accessories on the Famicom, because the Famicom's 15-pin input can handle 2 controllers.
It can't be since the 15-pin end is male (remember Famicom expansion port is male).

limwer

Quote from: P on January 15, 2015, 03:03:06 pm
I would check all pins with a multimeter. If it's a Famicom controller to NES adapter.

Quote from: maxellnormalbias on January 15, 2015, 11:56:37 am
It's for NES accessories on the Famicom, because the Famicom's 15-pin input can handle 2 controllers.
It can't be since the 15-pin end is male (remember Famicom expansion port is male).


I tried it and if there is continuity, but the control does not respond.