My new toaster commission

Started by Drakon, February 02, 2012, 07:18:46 pm

Previous topic - Next topic

Drakon

This toaster has the same rgb, s-video, and advanced audio featured in my av famicom.  I even installed a snes / n64 multi av port in the back.  It's about 95% done right now

Ignore the other dials and connector on the back this system was originally rgb and audio modded by acem77.  I was commissioned to upgrade this system to my standards.

Here's the link describing a bit more about it:

http://consolemods.forumotion.ca/t2-nes-2-and-toaster-commis...


And here's some piccies.







Algo Fonix

Wow, that looks freakin' nice. I wish I had the skill or patience to do a mod like this someday, haha.

turkishproverb

Awesome. I've been tempted to try one of those myself.  I've done similar, but never actually put the system in the toaster.

Drakon

February 04, 2012, 07:02:09 am #3 Last Edit: February 05, 2012, 04:52:05 pm by Drakon
Thanks I've actually got very efficient at making these systems and I've got the technique perfected.  I've built so many commissions I've figured out how to perfectly tweak a nes or famicom.

Anyway yesterday I wired up the rest of the multi av port.  Wired up the rest of the audio circuit.  Wired up a switch at the back that lets you switch between default audio and the upgraded audio circuit on the kit pcb.  You can switch the audio real time while the system is running.  Both the default system audio and the upgraded audio mix in the extended audio from the powerpak.  I also wired the video and audio wires into headers so if you ever want to take the nes pcb out of the case you can quickly disconnect it from the ports at the back.  Wiring is 100% done, all I need to do now is shorten the wires and mount the kit inside of the case:



Post Merge: February 05, 2012, 04:52:02 pm

System's done:







http://www.youtube.com/watch?v=xSCW7xoGcg0&feature=player_embedded