Gimmick repro with sunsoft 5PB

[cardiff]

Hello! All pictures are no longer available.  Does anyone still have the barcode world connection diagram?

[jensma]

I've compiled the info here:
https://jensma.de/nesrepro/gimmick/

Hopefully you'll find what you're searching for.

[cardiff]

I've compiled the info here:
https://jensma.de/nesrepro/gimmick/

Hopefully you'll find what you're searching for.

Yes, this is a great guide.  But I have a Barcode world.  There prg 32 pin.

[xIceMan]

I have made several Gimmick on Barcode since it's bigger PCB and allows easier usage for AY-3-8912 to be used in slot of PRG-RAM

If you're unsure of the pinouts just check for continuity on pin 1,2,24,30,31 on PRG ROM and 1,2,22,24,30,31 on CHR ROM and see if it's just drop in or need wires.

[cardiff]

I have made several Gimmick on Barcode since it's bigger PCB and allows easier usage for AY-3-8912 to be used in slot of PRG-RAM

If you're unsure of the pinouts just check for continuity on pin 1,2,24,30,31 on PRG ROM and 1,2,22,24,30,31 on CHR ROM and see if it's just drop in or need wires.

Almost everything coincides. Only the first leg is not connected. Did I get it right?

[xIceMan]

VPP can be connected to GND or VCC as this pin is only used during programming the EPROM.
Just solder it in directly I'd guess.

[cinder]

Hi good day. I acquired a Barcode World to make my own Mr. Gimmick. I programmed the roms and eproms and installed them without wiring, I tried the game and it works very well only without extra sounds. I followed this tutorial https://jensma.de/nesrepro/gimmick/. The problem is that after doing everything that the guide says regarding my FME-7 sound chip, the cartridge still does not hear the extra channels. Could you help me or someone will have a diagram for the Barcode world. I see that you say that you can remove the ram that this cartridge includes and mount the AY-3-8912 directly?

[cinder]

I have made several Gimmick on Barcode since it's bigger PCB and allows easier usage for AY-3-8912 to be used in slot of PRG-RAM

If you're unsure of the pinouts just check for continuity on pin 1,2,24,30,31 on PRG ROM and 1,2,22,24,30,31 on CHR ROM and see if it's just drop in or need wires.

Woow.
I can't with Barcode world.
I can't handle mine. I do not know what happens, my cartridge still does not hear the extra sound channels.
I add that I want to use this conversion on an American Nintendo Nes. The nintendo was already modified with the 47k resistor between pins 3 and 9.

[uzumaki]

Hi all, sorry to bump. If anyone is interested I am selling an unpopulated Gimmick reproduction PCB made by forum user Jensma. Details here: https://www.famicomworld.com/forum/index.php?topic=15408.0