Started by Rupert, March 07, 2017, 07:09:18 am
Famicom Controller Port Pinout (front) Port I Port II _____ ______ |12345| |123456| ¯¯ ¯¯ ¯¯ ¯¯P I 1: +5V, 2: CLK $4016, 3: P/S, 4: Data $4016.0, 5: GNDP II 1: +5V, 2: CLK $4017, 3: P/S, 4: Data $4017.0, 5: GND, 6: Mic $4016.2Note: P/S is latch and comes from the $4016.0 output on both controllers.
QuoteTo eyeball it, I put a 2.54mm breakaway pin header next to the female connector on the board. It doesn't line up but it's very close initially.
Quoteyour pictures of the Twin
Quote from: Rupert on January 15, 2018, 12:02:55 pmSo, In case anyone else would like to follow in my footsteps.....I found out that standerd 5 pin internal USB header connectors will plug right into the Famicom twin's internal controller ports. (skipping the microphone pin on P2 of course).I don't have my red & white Famicom in hand to confirm it works on the standard ones as well, but I suspect it does.[..]Some pictures to show what I'm talking about: https://imgur.com/a/2HDRh