Twin Famicom AC adapter

Started by mp3man04, November 04, 2019, 08:55:40 pm

Previous topic - Next topic

Miklo

I'm not sure but I can recommend this one!

Spend a little extra and get one that's 100% accurate and a perfect fit without guessing.

https://en.retrogamesupply.com/collections/nintendo/products/power-supply-for-nintendo-sharp-twin-famicom
I'm also into vintage air-cooled Volkswagens, vintage audio, reel to reel and vinyl record albums. 30+yrs<br />Get to know the man behind the screen - https://www.instagram.com/miklo_82/

FAMICOM_87

you can use everything regulated (DC) and the right polarity, I do not know about twin famicom, but standard one for FAMICOMs and Clones is center pin negative + --(o-- -  from 7.5V to 12V (15V will be ok too, but will heat too much  :fire:)  output voltage and at least 500mA current or higher 1A, 2A, 3A    The rule is that 7805 Voltage regulators inside all retro consoles can take from 7V up to 24V and regulate it to 5V  usually they are rated to 1A or less
This rule is for all retro consoles 9-12V 500mA or 1A better and look out for the DC polarity , never use AC power transformers like NES and SNES (you can use DC even for NES ans SNES as well so all I mentioned above applies here too) if you do not have the original transformer)