Helpin about modin Nes Console to from PAL to NTSC

Started by raziel90, January 11, 2016, 07:03:18 am

Previous topic - Next topic

FAMICOM_87

Quote from: number47 on January 22, 2016, 06:42:29 am
You'll have to find a NTSC XTAL - 21.4772MHz.
And join solderpads. There are three options: all three, left with center or right with center.




I come a cross of this particular famiclone and 60Hz mode work on the 26.6017MHz original X-tal the picture is in color ,but fuzzy when you connect GND to  "F50R6" (the hole correspond to this sign on the far left behind the gray cable)
Those 3 pads you suggested are 5V on the left GND on right and the middle I do not know, but it do not do nothing , unfortunately when I replace the X Tal with proper NTSC one 21,47727 the picture jumps and nothing shows :(