Started by FlyingTomahawk, February 13, 2020, 03:56:18 pm
Quote from: FlyingTomahawk on February 13, 2020, 07:20:46 pmThanks for your reply.Do you know a source for the PPU pinout?
Quote from: undefinedSo it is not necessary to lift or cut that pin 21 leg is that correct?
Quote from: undefinedThe nesdev wiki says to remove the 2SA937 transistor and then reuse it?Reuse how "exactly"? Solder the base, collector and emitter to the PPU legs directly?
Quote from: undefinedOn my current modified famicom I added two 1uf ceramic capacitors between pin 20 and 22 of the PPU and 40 to GND of the CPU. So i could/should replace the 20-22 capacitor to a 47uf tantalum?