Differents error codes while loading side B

Started by kerunaru, July 01, 2012, 04:19:21 am

Previous topic - Next topic

kerunaru

Hi all!

I have a Metroid disk and I get differents error codes while loading side B. Side A loads fine but side B shows me error 27 or 22 or 24.  :-\

I think side B is damaged but I want to share this situation with you so you can give me a second opinion...

Thanks!  :)
[ + - - . . ]~~~

Frank_fjs

Do any of your other disks experience loading problems?

It's most likely a damaged or dirty disk, but it could also be a slightly out of tune head on your disk console. I had this problem with 3D Hot Rally (also double sided) - I had to slow the motor down a fraction and then my console read both sides without issue.

fredJ

July 01, 2012, 05:03:02 am #2 Last Edit: July 01, 2012, 05:16:38 am by fredJ
Disk System needs better calibration.

Quote from: kerunaru on March 19, 2012, 01:02:21 am
I'd tried to calibrate the spindle for about 1 hour without success. At last, when I lost all hope, I decided to tighten the screw and keep my FDS on a shelf as a decoration piece. But before, I needed to try it once more... AND IT WORKS!

I screamed happily, running through my house like crazy!  :'(

I think I had luck!  :-[


Maybe that's the reason.  ;D

I can add, that Metroid is a more difficult disk because it loads so much.
Selling  Japanese games in Sweden since 2011 (as "japanspel").
blog: http://japanspel.blogspot.com

kerunaru

 :(

I'll try to recalibrate slightly the head... I'll tell you how it goes!

Thanks!
[ + - - . . ]~~~