Gimmick repro with sunsoft 5PB

Started by Pit, November 13, 2013, 08:19:07 am

Previous topic - Next topic

Howard81

Hi Jensma, I'd really be interested in a couple of your boards with shipping to the UK!  I've dropped you an enquiry through your website  ;D

jensma

Quote from: Howard81 on June 12, 2016, 02:41:24 am
Hi Jensma, I'd really be interested in a couple of your boards with shipping to the UK!  I've dropped you an enquiry through your website  ;D

Ah, alright. International shipping is 3,70€. You can send me a pm here if you like :)

L___E___T

I'd really like one as well if it's not too late?
My for Sale / Trade thread
http://www.famicomworld.com/forum/index.php?topic=9423.msg133828#msg133828
大事なのは、オチに至るまでの積み重ねなのです。

Raverrevolution

I've been meaning to grab one of these as well if you're still selling and shipping them out.  Thank you.

Pit

No agressivity in my words, but i can't stop thinking that even jensma does a great job, i'm disapointed to see this thread is turning into a shopping place.

Arkanix38

Agreed, ask jensma in Private Message or look on his website where he sells them.

xIceMan

Jensma's shop was taken down as he had problems with some people from what I know. Haven't heard from him after that via mail. So just PM or mail him.

jensma

Quote from: xIceMan on September 04, 2016, 02:16:09 pm
Jensma's shop was taken down as he had problems with some people from what I know. Haven't heard from him after that via mail. So just PM or mail him.


Yup, unfortunatly. I'm still around though and I'll answer to mails :)

Syco54645

So I attempted this using a barcode world using 27c020s. Both PRG and CHR were 32 pin so I dropped the CHR in directly and for the PRG I rewired the CE leg to ground, game is not working, just a gray screen. Anyone have any insight here?

jensma

Quote from: Syco54645 on November 23, 2016, 06:51:29 am
So I attempted this using a barcode world using 27c020s. Both PRG and CHR were 32 pin so I dropped the CHR in directly and for the PRG I rewired the CE leg to ground, game is not working, just a gray screen. Anyone have any insight here?


Hey there,

Have a look at this:
http://jensma.de/nesrepro/gimmick/

Cheers,
jensma

Pit

Quote from: Syco54645 on November 23, 2016, 06:51:29 am
So I attempted this using a barcode world using 27c020s. Both PRG and CHR were 32 pin so I dropped the CHR in directly and for the PRG I rewired the CE leg to ground, game is not working, just a gray screen. Anyone have any insight here?


With what I experienced reproducing Gimmick!, could be :

- 1st : solder flux on the cart connector, so try cleaning it the best as you can
- 2nd : bad wiring, so check all your connections !

This thread or jensma's website are really helpful for schematics.

Syco54645

Quote from: jensma on November 27, 2016, 08:59:01 am
Quote from: Syco54645 on November 23, 2016, 06:51:29 am
So I attempted this using a barcode world using 27c020s. Both PRG and CHR were 32 pin so I dropped the CHR in directly and for the PRG I rewired the CE leg to ground, game is not working, just a gray screen. Anyone have any insight here?


Hey there,

Have a look at this:
http://jensma.de/nesrepro/gimmick/

Cheers,
jensma


My PRG socket is 32 pins and your guide doesn't cover that from what I can tell.

Post Merge: November 30, 2016, 08:58:00 am

Quote from: Pit on November 28, 2016, 10:32:03 pm
Quote from: Syco54645 on November 23, 2016, 06:51:29 am
So I attempted this using a barcode world using 27c020s. Both PRG and CHR were 32 pin so I dropped the CHR in directly and for the PRG I rewired the CE leg to ground, game is not working, just a gray screen. Anyone have any insight here?


With what I experienced reproducing Gimmick!, could be :

- 1st : solder flux on the cart connector, so try cleaning it the best as you can
- 2nd : bad wiring, so check all your connections !

This thread or jensma's website are really helpful for schematics.


It has to be the wiring on the PRG side but jensma's site doesnt cover the 32 pin PRG on the board. I do not see anyone mention it in this thread either.

Pit

December 01, 2016, 12:02:15 pm #87 Last Edit: December 01, 2016, 12:14:23 pm by Pit
You're right, i think i have a scheme on my computer, i'll post it soon.

Did you look on the Web to see the prg wiring ? I think it's more than just one signal to rewire with the 27c020

Post Merge: December 01, 2016, 12:13:25 pm

Just remembered, there's no need of rewiring on sunsoft fme7 32 pins prg/chr and 27c020

Syco54645

Quote from: Pit on December 01, 2016, 12:02:15 pm
You're right, i think i have a scheme on my computer, i'll post it soon.

Did you look on the Web to see the prg wiring ? I think it's more than just one signal to rewire with the 27c020

Post Merge: December 01, 2016, 12:13:25 pm

Just remembered, there's no need of rewiring on sunsoft fme7 32 pins prg/chr and 27c020


Hey that worked! I had lifted CE and connected to the ground pin. Removed that jumper and wired into the hole and it works fine. No idea why but thanks! Perhaps Jensma could update his guide with this info.

Pit